Hi Charles, depends what it is (do you have a radio or not), but in general you could use this section. See if it applies to you.
§15.23 Home-built devices. (a) Equipment authorization is not required for devices that are not marketed, are not constructed from a kit, and are built in quantities of five or less for personal use. (b) It is recognized that the individual builder of home-built equipment may not possess the means to perform the measurements for determining compliance with the regulations. In this case, the builder is expected to employ good engineering practices to meet the specified technical standards to the greatest extent practicable. The provisions of §15.5 apply to this equipment. Sincerely, Dieter Paasche Senior Product Developer, Electrical CHRISTIE 809 Wellington Street North Kitchener, ON N2G 4Y7 Phone: 519-744-8005 ext.7211 www.christiedigital.com<http://www.christiedigital.com/> This e-mail message (including attachments, if any) is confidential. Any unauthorized use, distribution or disclosure is prohibited. If you have received this e-mail message in error, please notify the sender by reply e-mail or telephone and delete it and any attachments from your computer system and records. From: Grasso, Charles [Outlook] <[email protected]> Sent: viernes, 19 de junio de 2020 05:23 p. m. To: [email protected] Subject: [PSES] FCC Requirements for in-house test equipment Hello EMC Gurus! We in development of an inhouse piece of test gear and the question is: What (if any) are the FCC rules and procedure to cover said item.? How does the FCC cover this type of scenario? [Working From Home] Charles Grasso Dish Technologies (c) 303-204-2974 (h) 303-317-5530 (e ) [email protected]<mailto:[email protected]> (e2) [email protected]<mailto:[email protected]> - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]<mailto:[email protected]>> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html<https://nam03.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.ieee-pses.org%2Femc-pstc.html&data=01%7C01%7CDieter.Paasche%40christiedigital.com%7C636a472cc3f34533d04e08d81496ed94%7Cdf46f062ad2c407688e6c675c789a0d8%7C1&sdata=Baclo0L0BTx2AfDo7gknsosl4B4TK1to96A2mtlomdQ%3D&reserved=0> Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/<https://nam03.safelinks.protection.outlook.com/?url=http%3A%2F%2Fproduct-compliance.oc.ieee.org%2F&data=01%7C01%7CDieter.Paasche%40christiedigital.com%7C636a472cc3f34533d04e08d81496ed94%7Cdf46f062ad2c407688e6c675c789a0d8%7C1&sdata=JWgOavN8Hh41oURrHpfKveK5RVyTJMPdPkhy%2B9%2ByOnA%3D&reserved=0> can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/<https://nam03.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.ieee-pses.org%2F&data=01%7C01%7CDieter.Paasche%40christiedigital.com%7C636a472cc3f34533d04e08d81496ed94%7Cdf46f062ad2c407688e6c675c789a0d8%7C1&sdata=SSnFe5oAErBkj5KCTVqUOGWLPEm5aIpjklqOiP9W8pk%3D&reserved=0> Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe)<https://nam03.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.ieee-pses.org%2Flist.html&data=01%7C01%7CDieter.Paasche%40christiedigital.com%7C636a472cc3f34533d04e08d81496ed94%7Cdf46f062ad2c407688e6c675c789a0d8%7C1&sdata=M8OIB6P%2FrmEqY918oweu1ZXdj9D2DRWmHIbDQ%2FJ%2F7eY%3D&reserved=0> List rules: http://www.ieee-pses.org/listrules.html<https://nam03.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.ieee-pses.org%2Flistrules.html&data=01%7C01%7CDieter.Paasche%40christiedigital.com%7C636a472cc3f34533d04e08d81496ed94%7Cdf46f062ad2c407688e6c675c789a0d8%7C1&sdata=HseLmLTzR6K7qSDuP%2BqKSm8nCxzuMh1EeEweCESmuH8%3D&reserved=0> For help, send mail to the list administrators: Scott Douglas <[email protected]<mailto:[email protected]>> Mike Cantwell <[email protected]<mailto:[email protected]>> For policy questions, send mail to: Jim Bacher <[email protected]<mailto:[email protected]>> David Heald <[email protected]<mailto:[email protected]>> - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher: <[email protected]> David Heald: <[email protected]>
