Dear All, In this regulation there is a flowchart under section 3.2.1 which helps you to determine whether this regulation is applicable for testing for Electrical/electronic sub assembly products (ESAs)
At a certain moment the following question appears in this flowchart: "Connected via an interface type approved to this regulation as amended?". Is there somebody that knows how I should interpret this question? Where can I find the 'approved interface types as amended?" If the product to be tested is connected only to the standard cigar lighter (for 12V supply). Is this interface an interface which is approved as amended?? Thanks in advance for any advice related to this topic. Greetings, Bart - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher: <[email protected]> David Heald: <[email protected]>
