Thank You Charlie.Christopher
On Thursday, March 25, 2021, 12:45:32 PM PDT, Charlie Blackham
<[email protected]> wrote:
Chris
EN 302 502 doesn’t require LBT – but is for Broadband Fixed Wireless Access
(this doesn’t have to be “WiFi”, but often is)
Best regards
Charlie
Charlie Blackham
Sulis Consultants Ltd
Tel: +44 (0)7946 624317
Web:https://sulisconsultants.com/
Registered in England and Wales, number 05466247
From: Chris <[email protected]>
Sent: 25 March 2021 19:27
To: [email protected]; Charlie Blackham <[email protected]>
Subject: Re: [PSES] Adaptivity test for 5GHz access point
Charlie,
Yes we have both Master and slave devices.
How about EN 302 502 does it require LBT?
mostly we are in 5725-5850 MHz band due to higher EIRP.
Regards
Christopher
On Thursday, March 25, 2021, 12:17:52 PM PDT, Charlie Blackham
<[email protected]> wrote:
Christopher
EN 301 893 requires LBT to meet the mandatory Adaptivity clause
I’m assuming that you comply with DFS Slave only, as DFS master requires
ability to detect, so is a form of LBT.
I think the only bit of 5 GHz spectrum available to you is 5725-5875 MHz at 25
mW under EN 300 440. Some European countries allow higher powers in this band,
such as 200 mW, but that’s on a country by country basis
Best regards
Charlie
Charlie Blackham
Sulis Consultants Ltd
Tel: +44 (0)7946 624317
Web:https://sulisconsultants.com/
Registered in England and Wales, number 05466247
From: Chris <[email protected]>
Sent: 25 March 2021 17:40
To: [email protected]
Subject: [PSES] Adaptivity test for 5GHz access point
Folks,
I have a 5GHz Wifi product that does not meet LBT conformanence.
What ETSI certification can I pursue?
Can we use EN 301 893 or EN 302 502 standards.
We do however meet DFS requirements.
Thank you for your feedback in advance.
Regards
Christopher
-
----------------------------------------------------------------
This message is from the IEEE Product Safety Engineering Society emc-pstc
discussion list. To post a message to the list, send your e-mail to
<[email protected]>
All emc-pstc postings are archived and searchable on the web at:
http://www.ieee-pses.org/emc-pstc.html
Attachments are not permitted but the IEEE PSES Online Communities site at
http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used
formats), large files, etc.
Website: http://www.ieee-pses.org/
Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe)
List rules: http://www.ieee-pses.org/listrules.html
For help, send mail to the list administrators:
Scott Douglas <[email protected]>
Mike Cantwell <[email protected]>
For policy questions, send mail to:
Jim Bacher: <[email protected]>
David Heald: <[email protected]>
