Dear all, Is there anyone familiar with standard UL1564?
We are looking at requirement for Strength and rigidty and we cannot figure out what means single-circuit industrial truck battery charger. There is no such definition in the standard. Normally battery chargers have AC input, control circuit and output circuit. Is for example drop test applicable for fixed battery charger? Thank you for your support. Best regards, Bostjan Extact from the standard. 42 Strength and Rigidity Tests 42.1 General 42.1.1 There shall not be a reduction of spacings beyond the minimum acceptable level or exposure of a live part that presents a risk of electric shock when a product is subjected to the tests described in 42.2 - 42.4. The tests described in 42.3 and 42.4 apply only to single-circuit industrial truck battery chargers, and the tests are to be on a completely assembled and packaged charger. The rod described in 7.2 is to be used to determine whether a live part that presents a risk of electric shock is exposed. - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher: <[email protected]> David Heald: <[email protected]>
