Good day to all!! We have a industrial controller with radio capabilities (4G, Wi-Fi) that is tested for IEC 61010-1:2010.
1.Related to safety do we need to test for IEC 62368-1? According to the below ACMA Telecommunication Labelling Notice is required 2.If we have the radio modules approved for that standard, can we use that for compliance evidence? It is confusing for me that we test the equipment for two different safety standards (IEC 61010-1 and IEC 62368-1). Normally we are using IEC 61010-1 for a controller and now Australia requires also IEC 62368-1 Thank you for your answer if you are able to support!! IEC 62368-1 will only become mandatory in Australia when called up under the ACMA's Telecommunications Labelling Notice. It will eventually address requirements for acoustic safety which are currently under development within the IEC. Until such time the applicable Australian acoustic safety requirements will remain in AS/ACIF S004 and AS/CA S042.1 Communications Alliance - 3.13 Health and safety (commsalliance.com.au)<https://urldefense.com/v3/__https:/www.commsalliance.com.au/Standards-Guidance/3-standards-writing/3.13__;!!Nkc5UzxO!_oy7X9uyAD4ZIzILxQVi3j1qjhW7LQVkiIkQhoeKUxy4GHdsc3S68E34U33iGOxO$> Kind Regards / Saludos cordiales / Mit freundlichen Grüßen Daniel Rodríguez Sr. Equipment Compliance Specialist EMEA T +34 673556249 E drodrig...@ecolab.com<mailto:drodrig...@ecolab.com> ecolab.com CONFIDENTIALITY NOTICE: This e-mail communication and any attachments may contain proprietary and privileged information for the use of the designated recipients named above. Any unauthorized review, use, disclosure or distribution is prohibited. If you are not the intended recipient, please contact the sender by reply e-mail and destroy all copies of the original message. - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <emc-p...@ieee.org> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <sdoug...@ieee.org> Mike Cantwell <mcantw...@ieee.org> For policy questions, send mail to: Jim Bacher: <j.bac...@ieee.org> David Heald: <dhe...@gmail.com>