Hello Peter,
I have been working with Mike and I too concur with his answer. The EU and the
UKCA are not the same entities. At a minimum, two different addresses are
needed to identify the authorize representatives, hence the cleanest approach
is two different declarations of conformity (DoC). Just a thought.
Also note due to the short timeline that was provided by the Brexit separation.
The UKCA authorities chose to initially use the same set of harmonized
standards that the EU is using but that is more that likely to change. Also, as
Mike mentions, the terminology in the body of the DoCs does vary. The
references used are different between the UKCA and the EU.
Regards,
Andres
Andres Waszczenko
Sr. Product Safety & Compliance Specialist
Entrust Datacard
1187 Park Place
Shakopee MN, 55379
952-933-0768
[email protected]<mailto:[email protected]>
[cid:[email protected]]
From: MIKE SHERMAN <[email protected]>
Sent: Wednesday, 1 March, 2023 2:18 PM
To: [email protected]
Subject: [EXTERNAL] Re: [PSES] EU and UK DoC
WARNING: This email originated outside of Entrust.
DO NOT CLICK links or attachments unless you trust the sender and know the
content is safe.
________________________________
Yes, that is what we concluded.
In addition, there is some other terminology that differs between the two that
your client might have to deal with.
Mike
Sherman PSC LLC
On 03/01/2023 1:29 PM
[email protected]<mailto:[email protected]>
wrote:
Hello Group,
I have a client that wishes to use a single DoC for both EU (CE) and UK (UKCA).
He has figured out everything except one area and that is the address/location
for signature. Does he have to have two addresses shown on the DoC for
signature? One in EU and one in UK?
Thanks
Peter
-
----------------------------------------------------------------
This message is from the IEEE Product Safety Engineering Society emc-pstc
discussion list. To post a message to the list, send your e-mail to
<[email protected]<mailto:[email protected]>>
All emc-pstc postings are archived and searchable on the web at:
http://www.ieee-pses.org/emc-pstc.html<https://urldefense.com/v3/__http:/www.ieee-pses.org/emc-pstc.html__;!!FJ-Y8qCqXTj2!eSpyYoJSNLT2vdkeS4yj40AITSaEHsTeUFdKTlPuaOiLpYeJEBRHDnR4n0GuzxPv1962pV8qipWBMJgCOe6i46rZRm7N$>
Website:
http://www.ieee-pses.org/<https://urldefense.com/v3/__http:/www.ieee-pses.org/__;!!FJ-Y8qCqXTj2!eSpyYoJSNLT2vdkeS4yj40AITSaEHsTeUFdKTlPuaOiLpYeJEBRHDnR4n0GuzxPv1962pV8qipWBMJgCOe6i4ylzHGkb$>
Instructions: http://www.ieee-pses.org/list.html (including how to
unsubscribe)<https://urldefense.com/v3/__http:/www.ieee-pses.org/list.html__;!!FJ-Y8qCqXTj2!eSpyYoJSNLT2vdkeS4yj40AITSaEHsTeUFdKTlPuaOiLpYeJEBRHDnR4n0GuzxPv1962pV8qipWBMJgCOe6i49ElTJeW$>
List rules:
http://www.ieee-pses.org/listrules.html<https://urldefense.com/v3/__http:/www.ieee-pses.org/listrules.html__;!!FJ-Y8qCqXTj2!eSpyYoJSNLT2vdkeS4yj40AITSaEHsTeUFdKTlPuaOiLpYeJEBRHDnR4n0GuzxPv1962pV8qipWBMJgCOe6i49RAjEUA$>
For help, send mail to the list administrators:
Mike Cantwell <[email protected]<mailto:[email protected]>>
For policy questions, send mail to:
Jim Bacher <[email protected]<mailto:[email protected]>>
David Heald <[email protected]<mailto:[email protected]>>
________________________________
To unsubscribe from the EMC-PSTC list, click the following link:
https://listserv.ieee.org/cgi-bin/wa?SUBED1=EMC-PSTC&A=1<https://urldefense.com/v3/__https:/listserv.ieee.org/cgi-bin/wa?SUBED1=EMC-PSTC&A=1__;!!FJ-Y8qCqXTj2!eSpyYoJSNLT2vdkeS4yj40AITSaEHsTeUFdKTlPuaOiLpYeJEBRHDnR4n0GuzxPv1962pV8qipWBMJgCOe6i4100QL-v$>
-
----------------------------------------------------------------
This message is from the IEEE Product Safety Engineering Society emc-pstc
discussion list. To post a message to the list, send your e-mail to
<[email protected]<mailto:[email protected]>>
All emc-pstc postings are archived and searchable on the web at:
http://www.ieee-pses.org/emc-pstc.html<https://urldefense.com/v3/__http:/www.ieee-pses.org/emc-pstc.html__;!!FJ-Y8qCqXTj2!eSpyYoJSNLT2vdkeS4yj40AITSaEHsTeUFdKTlPuaOiLpYeJEBRHDnR4n0GuzxPv1962pV8qipWBMJgCOe6i46rZRm7N$>
Website:
http://www.ieee-pses.org/<https://urldefense.com/v3/__http:/www.ieee-pses.org/__;!!FJ-Y8qCqXTj2!eSpyYoJSNLT2vdkeS4yj40AITSaEHsTeUFdKTlPuaOiLpYeJEBRHDnR4n0GuzxPv1962pV8qipWBMJgCOe6i4ylzHGkb$>
Instructions: http://www.ieee-pses.org/list.html (including how to
unsubscribe)<https://urldefense.com/v3/__http:/www.ieee-pses.org/list.html__;!!FJ-Y8qCqXTj2!eSpyYoJSNLT2vdkeS4yj40AITSaEHsTeUFdKTlPuaOiLpYeJEBRHDnR4n0GuzxPv1962pV8qipWBMJgCOe6i49ElTJeW$>
List rules:
http://www.ieee-pses.org/listrules.html<https://urldefense.com/v3/__http:/www.ieee-pses.org/listrules.html__;!!FJ-Y8qCqXTj2!eSpyYoJSNLT2vdkeS4yj40AITSaEHsTeUFdKTlPuaOiLpYeJEBRHDnR4n0GuzxPv1962pV8qipWBMJgCOe6i49RAjEUA$>
For help, send mail to the list administrators:
Mike Cantwell <[email protected]<mailto:[email protected]>>
For policy questions, send mail to:
Jim Bacher <[email protected]<mailto:[email protected]>>
David Heald <[email protected]<mailto:[email protected]>>
________________________________
To unsubscribe from the EMC-PSTC list, click the following link:
https://listserv.ieee.org/cgi-bin/wa?SUBED1=EMC-PSTC&A=1<https://urldefense.com/v3/__https:/listserv.ieee.org/cgi-bin/wa?SUBED1=EMC-PSTC&A=1__;!!FJ-Y8qCqXTj2!eSpyYoJSNLT2vdkeS4yj40AITSaEHsTeUFdKTlPuaOiLpYeJEBRHDnR4n0GuzxPv1962pV8qipWBMJgCOe6i4100QL-v$>
Any email and files/attachments transmitted with it are confidential and are
intended solely for the use of the individual or entity to whom they are
addressed. If this message has been sent to you in error, you must not copy,
distribute or disclose of the information it contains. Please notify Entrust
immediately and delete the message from your system.
-
----------------------------------------------------------------
This message is from the IEEE Product Safety Engineering Society emc-pstc
discussion list. To post a message to the list, send your e-mail to
<[email protected]>
All emc-pstc postings are archived and searchable on the web at:
http://www.ieee-pses.org/emc-pstc.html
Website: http://www.ieee-pses.org/
Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe)
List rules: http://www.ieee-pses.org/listrules.html
For help, send mail to the list administrators:
Mike Cantwell <[email protected]>
For policy questions, send mail to:
Jim Bacher: <[email protected]>
David Heald: <[email protected]>
_________________________________________________
To unsubscribe from the EMC-PSTC list, click the following link:
https://listserv.ieee.org/cgi-bin/wa?SUBED1=EMC-PSTC&A=1
