We’ve been combining both onto one document.  It sometimes makes the document 
go to a second page because of the extra information.  We include Australia and 
anywhere else that will take a DoC into one document as well.  Haven’t had it 
rejected by anyone yet.

 

Dan

 

 

From: Andres Waszczenko 
[mailto:00001fcfb5f9b1f4-dmarc-requ...@listserv.ieee.org] 
Sent: Wednesday, March 1, 2023 3:31 PM
To: EMC-PSTC@LISTSERV.IEEE.ORG
Subject: Re: [PSES] [EXTERNAL] Re: [PSES] EU and UK DoC

 

Hello Peter,

 

I have been working with Mike and I too concur with his answer. The EU and the 
UKCA are not the same entities. At a minimum, two different addresses are 
needed to identify the authorize representatives, hence the cleanest approach 
is two different declarations of conformity (DoC). Just a thought.

 

Also note due to the short timeline that was provided by the Brexit separation. 
The UKCA authorities chose to initially use the same set of harmonized 
standards that the EU is using but that is more that likely to change. Also, as 
Mike mentions, the terminology in the body of the DoCs does vary. The 
references used are different between the UKCA and the EU.

 

Regards,

              Andres

 

Andres Waszczenko

Sr. Product Safety & Compliance Specialist

Entrust Datacard 

1187 Park Place

Shakopee MN, 55379

952-933-0768

 <mailto:andres.waszcze...@entrust.com> andres.waszcze...@entrust.com

 



 

 

From: MIKE SHERMAN <msherma...@comcast.net <mailto:msherma...@comcast.net> > 
Sent: Wednesday, 1 March, 2023 2:18 PM
To: EMC-PSTC@LISTSERV.IEEE.ORG <mailto:EMC-PSTC@LISTSERV.IEEE.ORG> 
Subject: [EXTERNAL] Re: [PSES] EU and UK DoC

 

WARNING: This email originated outside of Entrust.
DO NOT CLICK links or attachments unless you trust the sender and know the 
content is safe.

  _____  

Yes, that is what we concluded.  
In addition, there is some other terminology that differs between the two that 
your client might have to deal with.  

Mike 

Sherman PSC LLC 

On 03/01/2023 1:29 PM 000006cee064502d-dmarc-requ...@listserv.ieee.org 
<mailto:000006cee064502d-dmarc-requ...@listserv.ieee.org>  wrote: 

 

 

Hello Group, 

 

I have a client that wishes to use a single DoC for both EU (CE) and UK (UKCA). 
He has figured out everything except one area and that is the address/location 
for signature. Does he have to have two addresses shown on the DoC for 
signature? One in EU and one in UK? 

 

 

Thanks 

Peter 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

- 
---------------------------------------------------------------- 

This message is from the IEEE Product Safety Engineering Society emc-pstc 
discussion list. To post a message to the list, send your e-mail to 
<emc-p...@ieee.org <mailto:emc-p...@ieee.org> >

All emc-pstc postings are archived and searchable on the web at: 
http://www.ieee-pses.org/emc-pstc.html 
<https://urldefense.com/v3/__http:/www.ieee-pses.org/emc-pstc.html__;!!FJ-Y8qCqXTj2!eSpyYoJSNLT2vdkeS4yj40AITSaEHsTeUFdKTlPuaOiLpYeJEBRHDnR4n0GuzxPv1962pV8qipWBMJgCOe6i46rZRm7N$>
 

Website: http://www.ieee-pses.org/ 
<https://urldefense.com/v3/__http:/www.ieee-pses.org/__;!!FJ-Y8qCqXTj2!eSpyYoJSNLT2vdkeS4yj40AITSaEHsTeUFdKTlPuaOiLpYeJEBRHDnR4n0GuzxPv1962pV8qipWBMJgCOe6i4ylzHGkb$>
 
Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) 
<https://urldefense.com/v3/__http:/www.ieee-pses.org/list.html__;!!FJ-Y8qCqXTj2!eSpyYoJSNLT2vdkeS4yj40AITSaEHsTeUFdKTlPuaOiLpYeJEBRHDnR4n0GuzxPv1962pV8qipWBMJgCOe6i49ElTJeW$>
 
List rules: http://www.ieee-pses.org/listrules.html 
<https://urldefense.com/v3/__http:/www.ieee-pses.org/listrules.html__;!!FJ-Y8qCqXTj2!eSpyYoJSNLT2vdkeS4yj40AITSaEHsTeUFdKTlPuaOiLpYeJEBRHDnR4n0GuzxPv1962pV8qipWBMJgCOe6i49RAjEUA$>
 

For help, send mail to the list administrators:
Mike Cantwell <mcantw...@ieee.org <mailto:mcantw...@ieee.org> >

For policy questions, send mail to:
Jim Bacher <j.bac...@ieee.org <mailto:j.bac...@ieee.org> >
David Heald <dhe...@gmail.com <mailto:dhe...@gmail.com> >

  _____  

To unsubscribe from the EMC-PSTC list, click the following link: 
https://listserv.ieee.org/cgi-bin/wa?SUBED1=EMC-PSTC 
<https://urldefense.com/v3/__https:/listserv.ieee.org/cgi-bin/wa?SUBED1=EMC-PSTC&A=1__;!!FJ-Y8qCqXTj2!eSpyYoJSNLT2vdkeS4yj40AITSaEHsTeUFdKTlPuaOiLpYeJEBRHDnR4n0GuzxPv1962pV8qipWBMJgCOe6i4100QL-v$>
 &A=1

-
----------------------------------------------------------------

This message is from the IEEE Product Safety Engineering Society emc-pstc 
discussion list. To post a message to the list, send your e-mail to 
<emc-p...@ieee.org <mailto:emc-p...@ieee.org> >

All emc-pstc postings are archived and searchable on the web at: 
http://www.ieee-pses.org/emc-pstc.html 
<https://urldefense.com/v3/__http:/www.ieee-pses.org/emc-pstc.html__;!!FJ-Y8qCqXTj2!eSpyYoJSNLT2vdkeS4yj40AITSaEHsTeUFdKTlPuaOiLpYeJEBRHDnR4n0GuzxPv1962pV8qipWBMJgCOe6i46rZRm7N$>
 

Website: http://www.ieee-pses.org/ 
<https://urldefense.com/v3/__http:/www.ieee-pses.org/__;!!FJ-Y8qCqXTj2!eSpyYoJSNLT2vdkeS4yj40AITSaEHsTeUFdKTlPuaOiLpYeJEBRHDnR4n0GuzxPv1962pV8qipWBMJgCOe6i4ylzHGkb$>
 
Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) 
<https://urldefense.com/v3/__http:/www.ieee-pses.org/list.html__;!!FJ-Y8qCqXTj2!eSpyYoJSNLT2vdkeS4yj40AITSaEHsTeUFdKTlPuaOiLpYeJEBRHDnR4n0GuzxPv1962pV8qipWBMJgCOe6i49ElTJeW$>
 
List rules: http://www.ieee-pses.org/listrules.html 
<https://urldefense.com/v3/__http:/www.ieee-pses.org/listrules.html__;!!FJ-Y8qCqXTj2!eSpyYoJSNLT2vdkeS4yj40AITSaEHsTeUFdKTlPuaOiLpYeJEBRHDnR4n0GuzxPv1962pV8qipWBMJgCOe6i49RAjEUA$>
  

For help, send mail to the list administrators:
Mike Cantwell <mcantw...@ieee.org <mailto:mcantw...@ieee.org> > 

For policy questions, send mail to:
Jim Bacher <j.bac...@ieee.org <mailto:j.bac...@ieee.org> >
David Heald <dhe...@gmail.com <mailto:dhe...@gmail.com> > 

  _____  

To unsubscribe from the EMC-PSTC list, click the following link: 
https://listserv.ieee.org/cgi-bin/wa?SUBED1=EMC-PSTC 
<https://urldefense.com/v3/__https:/listserv.ieee.org/cgi-bin/wa?SUBED1=EMC-PSTC&A=1__;!!FJ-Y8qCqXTj2!eSpyYoJSNLT2vdkeS4yj40AITSaEHsTeUFdKTlPuaOiLpYeJEBRHDnR4n0GuzxPv1962pV8qipWBMJgCOe6i4100QL-v$>
 &A=1 

Any email and files/attachments transmitted with it are confidential and are 
intended solely for the use of the individual or entity to whom they are 
addressed. If this message has been sent to you in error, you must not copy, 
distribute or disclose of the information it contains. Please notify Entrust 
immediately and delete the message from your system. 

-
----------------------------------------------------------------

This message is from the IEEE Product Safety Engineering Society emc-pstc 
discussion list. To post a message to the list, send your e-mail to 
<emc-p...@ieee.org <mailto:emc-p...@ieee.org> >

All emc-pstc postings are archived and searchable on the web at: 
http://www.ieee-pses.org/emc-pstc.html

Website: http://www.ieee-pses.org/
Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) 
<http://www.ieee-pses.org/list.html> 
List rules: http://www.ieee-pses.org/listrules.html 

For help, send mail to the list administrators:
Mike Cantwell <mcantw...@ieee.org <mailto:mcantw...@ieee.org> > 

For policy questions, send mail to:
Jim Bacher <j.bac...@ieee.org <mailto:j.bac...@ieee.org> >
David Heald <dhe...@gmail.com <mailto:dhe...@gmail.com> > 

  _____  

To unsubscribe from the EMC-PSTC list, click the following link: 
https://listserv.ieee.org/cgi-bin/wa?SUBED1=EMC-PSTC 
<https://listserv.ieee.org/cgi-bin/wa?SUBED1=EMC-PSTC&A=1> &A=1 


-
----------------------------------------------------------------
This message is from the IEEE Product Safety Engineering Society emc-pstc 
discussion list. To post a message to the list, send your e-mail to 
<emc-p...@ieee.org>

All emc-pstc postings are archived and searchable on the web at:
http://www.ieee-pses.org/emc-pstc.html

Website:  http://www.ieee-pses.org/
Instructions:  http://www.ieee-pses.org/list.html (including how to unsubscribe)
List rules: http://www.ieee-pses.org/listrules.html

For help, send mail to the list administrators:
Mike Cantwell <mcantw...@ieee.org>

For policy questions, send mail to:
Jim Bacher:  <j.bac...@ieee.org>
David Heald: <dhe...@gmail.com>
_________________________________________________
To unsubscribe from the EMC-PSTC list, click the following link: 
https://listserv.ieee.org/cgi-bin/wa?SUBED1=EMC-PSTC&A=1

Reply via email to