The DoC states the standards applied, and those standards
(CISPR-originated) give very precise details of the test set-up.
On 2024-07-08 17:27, Matthew Wilson | GBE wrote:
The downside of third-party power supplies is although they will have
a nice declaration of conformity (for us in the EU (OK I know UK isn’t
any more but we’ve decided to carry on with it behind the scenes!) and
claims for EMC compliance, never is any precise detail of how and the
environment in which these tests were performed provided. A resistive
load on the shortest possible DC output leads, with short mains input
leads too I’m sure is the setup – happy to be proved wrong!
--
OOO - Own Opinions Only
Best Wishes
John Woodgate
Keep trying
--
This email has been checked for viruses by AVG antivirus software.
www.avg.com
-
----------------------------------------------------------------
This message is from the IEEE Product Safety Engineering Society emc-pstc
discussion list. To post a message to the list, send your e-mail to
[email protected]
All emc-pstc postings are archived and searchable on the web at:
https://www.mail-archive.com/[email protected]/
Website: https://ewh.ieee.org/soc/pses/
Instructions: https://ewh.ieee.org/soc/pses/list.html (including how to
unsubscribe)
List rules: https://ewh.ieee.org/soc/pses/listrules.html
For help, send mail to the list administrators:
Mike Sherman at: [email protected]
Rick Linford at: [email protected]
For policy questions, send mail to:
Jim Bacher: <[email protected]>
_________________________________________________
To unsubscribe from the EMC-PSTC list, click the following link:
https://listserv.ieee.org/cgi-bin/wa?SUBED1=EMC-PSTC&A=1
