Quick question, is the unit housed in plastic or metal? Having a great shielded cable and connector may not help if there isn't a good metal enclosure to bond it to.
Best, -=-Karen Burnham President and Chief Engineer, NCE EMC United, Inc. www.emcunited.com On Thu, May 15, 2025 at 9:43 AM [email protected] < [email protected]> wrote: > Hello group, > I am working on a HDMI cable where it does not pass radiated emissions > with good margin. I have great braid coverage and have soldered the braid > to the connector shell and have fully sealed and covered it with copper > tape. Is there anything else that I need to do? My issue is mainly at below > GHz when I use 1080P resolution. > > Thank you > > Peter > > ------------------------------ > > This message is from the IEEE Product Safety Engineering Society emc-pstc > discussion list. To post a message to the list, send your e-mail to > [email protected] > All emc-pstc postings are archived and searchable on the web at: > https://www.mail-archive.com/[email protected]/ > > Website: https://ewh.ieee.org/soc/pses/ > Instructions: https://ewh.ieee.org/soc/pses/list.html (including how to > unsubscribe) <https://ewh.ieee.org/soc/pses/list.html> > List rules: > https://pses.ieee.org/wp-content/uploads/2024/12/EM-PSTC-List-Rules.pdf > > For help, send mail to the list administrators: > Mike Sherman at: [email protected] > Rick Linford at: [email protected] > > For policy questions, send mail to: > Jim Bacher at: [email protected] > ------------------------------ > > To unsubscribe from the EMC-PSTC list, click the following link: > https://listserv.ieee.org/cgi-bin/wa?SUBED1=EMC-PSTC&A=1 > - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to [email protected] All emc-pstc postings are archived and searchable on the web at: https://www.mail-archive.com/[email protected]/ Website: https://ewh.ieee.org/soc/pses/ Instructions: https://ewh.ieee.org/soc/pses/list.html (including how to unsubscribe) List rules: https://pses.ieee.org/wp-content/uploads/2024/12/EM-PSTC-List-Rules.pdf For help, send mail to the list administrators: Mike Sherman at: [email protected] Rick Linford at: [email protected] For policy questions, send mail to: Jim Bacher: <[email protected]> _________________________________________________ To unsubscribe from the EMC-PSTC list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=EMC-PSTC&A=1
