Michał wrote: >I'm using converters DXF->NGC and if in the project are for exmple two >lines: >(0,0)->(100,100) and (100,100)->(0,0) then in g-code are two moves from >0,0 to 100,100 and reverse. >coords of the both lines are exactly the same to (0.0001) precision. > > So, the G-code reads like this :
N123 G01 X100 Y100 N124 G01 X0 Y0 And, this causes an error? I have been running various versions of EMC since 1998, and have not run into such a problem. I do note this causes a complete reversal of the axis without a pause. I wonder if this is causing a problem with your drive? You could try a feedrate override of 50%, or put a one second pause between the two moves. Jon ------------------------------------------------------------------------- Take Surveys. Earn Cash. Influence the Future of IT Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT & business topics through brief surveys-and earn cash http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
