Stephen Wille Padnos wrote: >> # connect index pulses to motion controller >> # do these when index pulsing is figured out >> net Xindex axis.0.index-enable ppmc.0.encoder.00.index-enable >> net Xindex axis.1.index-enable ppmc.0.encoder.01.index-enable >> net Xindex axis.2.index-enable ppmc.0.encoder.02.index-enable >> >> > It would probably be helpful to name these Xindex, Yindex, and Zindex ...
Yep. The above lines create a single signal Xindex, which is connected to all three motion controller axes, and all three encoders. So when ANY axis gets an index pulse, index enable is reset for ALL axes. When you connect things in peculiar ways, you get peculiar results. Regards, John Kasunich ------------------------------------------------------------------------- This SF.net email is sponsored by DB2 Express Download DB2 Express C - the FREE version of DB2 express and take control of your XML. No limits. Just data. Click to get it now. http://sourceforge.net/powerbar/db2/ _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
