Hi Bill, Synergy ( webersys.com) or google for 'synergy cad' should get you to the site for a cad/cam package that runs on either Windoze or linux. If you can do with 2.5D cad then the package is free. It is upgradable in steps eg. 2.5D cam, wireframe and finally parasolids. Without support I think the prices are $250, $750 and $1200 but don't quote me on that. Try the downloadable demo and go from there. The cam part of the package has an emc post.
HTH Dave On Jul 4, 2007, at 12:23 PM, [EMAIL PROTECTED] wrote: > Hi all: > > Can any one tell me how to get my epson printer to work with emc2??? > > Also, is their any cad software that works with linux that we can > use with emc2??? > > Many thanks: > > Bill > > ---------------------------------------------------------------------- > --- > This SF.net email is sponsored by DB2 Express > Download DB2 Express C - the FREE version of DB2 express and take > control of your XML. No limits. Just data. Click to get it now. > http://sourceforge.net/powerbar/db2/ > _______________________________________________ > Emc-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-users ------------------------------------------------------------------------- This SF.net email is sponsored by DB2 Express Download DB2 Express C - the FREE version of DB2 express and take control of your XML. No limits. Just data. Click to get it now. http://sourceforge.net/powerbar/db2/ _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
