On Wed, Aug 22, 2007 at 02:02:39PM +0000, ben lipkowitz wrote: > > > The first couple of cuts I was using a chord length of about 100mm, > > meaning that my g-code statements around the leading edge where about > > 0.1mm apart or less, which caused the feedrate to slow down for some > > reason, which caused too much heat to build up in the leading edge. > > If you use G64 P0.1 the trajectory planner *should* automatically blend > out the unnecessary segments and give you full speed over the entire shape.
Unfortunately, G64 P- only simplifies nearly-colinear segments when they are purely XYZ movement. If there is any movement on the other axes (ABC or UVW) then the simplification doesn't take place. Jeff ------------------------------------------------------------------------- This SF.net email is sponsored by: Splunk Inc. Still grepping through log files to find problems? Stop. Now Search log events and configuration files using AJAX and a browser. Download your FREE copy of Splunk now >> http://get.splunk.com/ _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
