This is probably unrelated but... I found that while in MDI mode, if you make a change to the tool offset file, you need to do a "G43 hX" to see the change in AXIS even if the change is to the current tool. I found using the "Machine/Show EMC Status" helped to figure this out.
Kirk On Tue, 2007-10-09 at 13:39 -0700, Alan Condit wrote: > Hi all, > > I created a tool table in my configs folder. In my ini file I named > it mill.tbl but it doesn't seem to load in emc2 2.1.7. So, is that > the correct location? What else do I need to do? > > Alan ... snip -- Kirk Wallace (Hardinge HNC lathe, California, USA http://www.wallacecompany.com/machine_shop/ ) ------------------------------------------------------------------------- This SF.net email is sponsored by: Splunk Inc. Still grepping through log files to find problems? Stop. Now Search log events and configuration files using AJAX and a browser. Download your FREE copy of Splunk now >> http://get.splunk.com/ _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
