Are you referrinfg to emcsvr (emc server)? if so, that one runs by default since emc2.0.x (if my memory serves me right). emcpanel was some textmode GUI written by NIST quite some while ago, not sure anyone still knows/uses it. there is keystick included with emc2, which should run without X. I say should because at the moment I think it uses xterm to run.. but you can probably change that (inside /usr/bin/emc)
Regards, Alex ----- Original Message ----- From: "Kirk Wallace" <[EMAIL PROTECTED]> To: "Enhanced Machine Controller (EMC)" <[email protected]> Sent: Tuesday, December 11, 2007 8:08 PM Subject: [Emc-users] emcpanel >I want to look at running emcpanel on my EMC server, but I can't find > it. I am guessing that I could download the source and compile it? Can > the EMC server be configured to not need a local display process? > Thanks. > -- > Kirk Wallace (California, USA > http://www.wallacecompany.com/machine_shop/ > Hardinge HNC lathe, > Bridgeport mill conversion, doing XY now, > Zubal lathe conversion pending) > > > ------------------------------------------------------------------------- > SF.Net email is sponsored by: > Check out the new SourceForge.net Marketplace. > It's the best place to buy or sell services for > just about anything Open Source. > http://sourceforge.net/services/buy/index.php > _______________________________________________ > Emc-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-users > ------------------------------------------------------------------------- SF.Net email is sponsored by: Check out the new SourceForge.net Marketplace. It's the best place to buy or sell services for just about anything Open Source. http://sourceforge.net/services/buy/index.php _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
