On Tue, 2007-12-11 at 20:19 +0200, Alex Joni wrote: > Are you referrinfg to emcsvr (emc server)? if so, that one runs by default > since emc2.0.x (if my memory serves me right).
No, but now that you mention it, if emcsvr normally runs in a standard configuration, why the extra call for it in the remote configuration? ... [EMCSERVER] EMCSERVER = emcsvr ... > emcpanel was some textmode GUI written by NIST quite some while ago, not > sure anyone still knows/uses it. It is still called out in the manuals. Maybe worth fixing? > there is keystick included with emc2, which should run without X. I say > should because at the moment I think it uses xterm to run.. but you can > probably change that (inside /usr/bin/emc) Keystick ran fine for me on the server with tkemc on the remote, so I need to run down how to run it away from X. > > Regards, > Alex Thanks for the help. -- Kirk Wallace (California, USA http://www.wallacecompany.com/machine_shop/ Hardinge HNC lathe, Bridgeport mill conversion, doing XY now, Zubal lathe conversion pending) ------------------------------------------------------------------------- SF.Net email is sponsored by: Check out the new SourceForge.net Marketplace. It's the best place to buy or sell services for just about anything Open Source. http://sourceforge.net/services/buy/index.php _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
