On Thu, 2008-01-31 at 12:54 -0800, Kirk Wallace wrote: ... snip > In thinking about scales again, one thought that came to mind is, EMC > might make a good CMM (manual or powered). But I guess the real magic is > in the granite slides, though errors could be mapped out. Which brings > me back to the issue of accurate standards. > > Another thought, is there any value in having an RS-232 connection with > serial calipers or micrometers?
FYI on eBay: http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=290200642943 EMC CMM? -- Kirk Wallace (California, USA http://www.wallacecompany.com/machine_shop/ Hardinge HNC lathe, Bridgeport mill conversion, doing XY now, Zubal lathe conversion pending) ------------------------------------------------------------------------- This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2008. http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
