On Friday 22 February 2008, Steve Stallings wrote: >maybe this one? > >http://www.pmdx.com/PMDX-106/ > >full disclosure.... I run the company > >Steve Stallings > That resembles it, but ISTR the one I was looking at had the relays onboard to replace the rev/off/fwd switching of the KBIC, or am I confused? They were good sized relays, like the P&B's that are available up to 4pdt in a .750"w x 1.25"h x about 1.125" long. Can those little dip relays I see 3 of do that too?
I'll go read the .pdf, that may be the one, thanks Steve. >> -----Original Message----- >> From: [EMAIL PROTECTED] >> [mailto:[EMAIL PROTECTED] Behalf Of Gene >> Heskett >> Sent: Friday, February 22, 2008 6:03 PM >> To: Enhanced Machine Controller (EMC) >> Subject: [Emc-users] Spindle control for micromill Q's >> >> >> Greetings; >> >> I came across a link 4 or 5 days ago for a speed controller for >> these line >> voltage dc motors like the HF mill and 7zx12 lathes use that had all the >> fwd/reverse relays etc incorporated on the board, along with a variable >> voltage optoisolated source that replaced the speed pot in the >> KBIC circuit, >> and sold for a hair less than $90, which compares with the >> DigiSpeedXL at $66 >> but it didn't have the extra reversing relays this interface kit does. >> >> I neglected to bookmark the site, and now google can't find it >> again. And I'd >> would rather not deal with an au company as they advertise in >> USD, but I've >> wound up paying in AUD which is a good premium charge for >> somebody. Twice >> now, and the diff has totalled to nearly 50 bucks. >> >> Can anyone else recall the name or url for the interface/control >> device I'm >> describing? >> >> Thanks. >> >> -- >> Cheers, Gene >> "There are four boxes to be used in defense of liberty: >> soap, ballot, jury, and ammo. Please use in that order." >> -Ed Howdershelt (Author) >> Your/our computer(s) had suffered a memory leak, and we are >> waiting for them >> to be topped up. >> >> ------------------------------------------------------------------------- >> This SF.net email is sponsored by: Microsoft >> Defy all challenges. Microsoft(R) Visual Studio 2008. >> http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ >> _______________________________________________ >> Emc-users mailing list >> Emc-users@lists.sourceforge.net >> https://lists.sourceforge.net/lists/listinfo/emc-users > >------------------------------------------------------------------------- >This SF.net email is sponsored by: Microsoft >Defy all challenges. Microsoft(R) Visual Studio 2008. >http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ >_______________________________________________ >Emc-users mailing list >Emc-users@lists.sourceforge.net >https://lists.sourceforge.net/lists/listinfo/emc-users -- Cheers, Gene "There are four boxes to be used in defense of liberty: soap, ballot, jury, and ammo. Please use in that order." -Ed Howdershelt (Author) I'll see you... on the dark side of the moon... -- Pink Floyd ------------------------------------------------------------------------- This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2008. http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
