Greetings, Alright, so after talking with Jetway I went ahead and ordered a board with a picoPSU. Just for future reference here is what I found out about the part numbers:
J7F2WEIG-OC-LF J7F2WEIG 1GHz VIA C7 processor J7F2WEIG5 1.5GHz VIA C7 processor 12 watts J7F2WEIG5D 1.5GHz VIA C7 processor 25 watts J7F2WEIG2E 1.2GHz VIA C7 processor fanless OC organic capacitor LF time stamp Thanks again for everyones help, Greg Greg Pettit wrote: > Hi Ray, > > Wow those Jetway boards are pretty cool and with the parallel port not > being on the back plane, they should work well in an enclosure. I found > a J7F2WE1G5-OC-LF on the new egg website. I am not sure what the 5 in > the part number means, I guess I will have to give the guys over at > Jetway a call. > http://www.newegg.com/Product/Product.aspx?Item=N82E16813153092 > > Is this the power supply you were referring to? > JetWay Model JAD12VB 80W DC-DC 12V power supply > http://www.newegg.com/Product/Product.aspx?Item=N82E16813998007 > > I got to have one! > > Thanks again, > Greg > > [EMAIL PROTECTED] wrote: >> Hi Greg >> >> Found it on a customer's LAN. Jetway 7F2WE1G-OC-LF. I asked an engineer at >> Jetway >> how long they would be making this board and he indicated about 5 more >> years. They >> do have a version without the tv interface but they seem to be really >> scarce. >> >> The parport is a 26 pin header behind the plugs so I was able to modify the >> NEMA box >> with a small cutout for mouse, kbd, and display connectors without fighting >> the >> parallel port cable. Went to a local used computer store and found a few >> dozen cables >> with the right ends. >> >> Ray >> >> >> >> --- [EMAIL PROTECTED] wrote: >> >> From: Greg Pettit <[EMAIL PROTECTED]> >> To: "Enhanced Machine Controller (EMC)" <[email protected]> >> Subject: Re: [Emc-users] micro ATX with on-board video inside NEMA >> style enclosure >> Date: Wed, 27 Feb 2008 20:52:49 -0500 >> >> Not a bad idea. I have a PC that I would like to put through the >> bandsaw! John nice blog. >> >> Dave, do you know where I could find out which Jetway board that Ray may >> have used? I did a quick search but I didn't find anything. >> >> Thanks, >> Greg >> >> John Kasunich wrote: >>> Ed wrote: >>>> Greg Pettit wrote: >>>>> The problem I have is that even after sever months, my drives, computer, >>>>> and power supplies are still sitting on a cart. So I thought I would >>>>> clean things up by putting all the components in a NEMA style enclosure >>>>> and mounting it to the base of the mill. >>>>> Anyone >>>>> mounted an ATX motherboard in a NEMA enclsoure and fabricated a bracket >>>>> for the PCI cards? >>>>> >>>> How about chopping apart an ATX case and using the relevant section. >>>> Attachment holes and brackets all in one piece. Ed. >>>> >>> That's what I did. I attacked an old Gateway tower with various >>> implements of destruction until I had something that held all the >>> necessary bits and would fit in my NEMA box. >>> >>> Note: an optical drive is NOT a necessary bit - if you are connected to >>> a network (highly recommended), the only time you'll need a CD-ROM drive >>> is to do the initial install. For that you can just plug the drive in >>> and balance it somewhere temporarily. >>> >>> More info and photos in this blog posting: >>> http://jmkasunich.dyndns.org/cgi-bin/blosxom/shoptask/pc-cased-and-mounted-12-14-07.html >>> >>> Regards, >>> >>> John Kasunich >>> >>> ------------------------------------------------------------------------- >>> This SF.net email is sponsored by: Microsoft >>> Defy all challenges. Microsoft(R) Visual Studio 2008. >>> http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ >>> _______________________________________________ >>> Emc-users mailing list >>> [email protected] >>> https://lists.sourceforge.net/lists/listinfo/emc-users >>> >> ------------------------------------------------------------------------- >> This SF.net email is sponsored by: Microsoft >> Defy all challenges. Microsoft(R) Visual Studio 2008. >> http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ >> _______________________________________________ >> Emc-users mailing list >> [email protected] >> https://lists.sourceforge.net/lists/listinfo/emc-users >> >> >> >> ------------------------------------------------------------------------- >> This SF.net email is sponsored by: Microsoft >> Defy all challenges. Microsoft(R) Visual Studio 2008. >> http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ >> _______________________________________________ >> Emc-users mailing list >> [email protected] >> https://lists.sourceforge.net/lists/listinfo/emc-users >> > > ------------------------------------------------------------------------- > This SF.net email is sponsored by: Microsoft > Defy all challenges. Microsoft(R) Visual Studio 2008. > http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ > _______________________________________________ > Emc-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-users > ------------------------------------------------------------------------- This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2008. http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
