Bob Freeman wrote: > Hello, All, > > CNC is just good fun but sometimes I like to work with things I can't > see, electromagnetics (i.e. antennas). Hope you find the EMC-based > project I've started, the Enhanced Machine Controller-based Antenna > Range (EMCAR), interesting. You can see it at emcar.sourceforge.net. > > I'll be the first to say that I am not a programmer. So, if any of you > software folks have an interest in antenna measurements, I could surely > use your help (you can see this if you look at the code)! But, in any > case, emcar works for my measurement purposes and there's plenty of room > to improve it in the future. One of my customers uses the bottom of a Taig (just the X-Y table) and EMC to profile the beam from industrial lasers they make. The put in a G-code program to step through a grid and pause every position, and a radiometer reads the beam power at that spot. They are real happy with it.
Jon ------------------------------------------------------------------------- This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2008. http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
