Hi Stuart, I have to play dumb here. I just let Synergy do it's thing. I didn't find anything in the post. If you draw it correctly it seems synergy will do it.
I think emc is double precision internally. Plenty of resolution. :-) Someone will correct me if this is incorrect. ;-) Dave On Mar 10, 2008, at 11:01 AM, Stuart Stevenson wrote: > Gentlemen, > Does Synergy's post allow you to specify the end point of the arc > to be exactly on the circle? The distance between the starting point > and the center of the radius AND the distance between the ending point > and the center of the radius must match. > I don't know the numeric precision of the calculations in EMC but > on a Fanuc control I have had to round down by a part of one ten > thousandth of an inch in some of my manual calculations to make the > circle interpolation work. > thanks > Stuart > > ---------------------------------------------------------------------- > --- > This SF.net email is sponsored by: Microsoft > Defy all challenges. Microsoft(R) Visual Studio 2008. > http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users ------------------------------------------------------------------------- This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2008. http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
