On Mon, 2008-03-10 at 12:27 -0400, Gene Heskett wrote: ...snip > You can see mine at <http://gene.homelinux.net:85/gene/emc> along with the > rest of the old farts messy machineing corner in my wood working shop. That > *was* an HF MicroMill at one point in past history, not sure what it should > be called now. The Z axis motor is a 425oz, and I can now exert 150 pounds > of push on a drill bit, so I can actually drill decent sized holes in steel > with gcode. The rest of the motors are 262oz motors. xylotex drivers.
I like the design of the CNC mill, I may need to copy some of it. What size and make is the lathe? That's clever how you kept the non-CNC look. -- Kirk Wallace (California, USA http://www.wallacecompany.com/machine_shop/ Hardinge HNC lathe, Bridgeport mill conversion, doing XY now, Zubal lathe conversion pending) ------------------------------------------------------------------------- This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2008. http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
