> > ------------------------------ > > Message: 6 > Date: Tue, 1 Apr 2008 20:50:41 -0500 > From: Chris Radek <[EMAIL PROTECTED]> > Subject: Re: [Emc-users] cincinnati > To: "Enhanced Machine Controller (EMC)" > <[email protected]> > Message-ID: <[EMAIL PROTECTED]> > Content-Type: text/plain; charset=us-ascii > > On Tue, Apr 01, 2008 at 05:12:23PM -0500, Stuart Stevenson wrote: > > Should it be possible to jog the W axis? > > I don't see anything obvious wrong in your hal config. > > Does axis.8.jog-enable get set appropriately when you select W in > AXIS? Do the jog-counts change? We have to narrow down where it's > going wrong. > > > Chris, I finally checked this out. The axis.8.jog-enable is set true. The jog-counts change with the handwheel. The machine does not move. Otherwise, the machine is moving well. I will post some video shortly. thanks Stuart
------------------------------------------------------------------------- This SF.net email is sponsored by the 2008 JavaOne(SM) Conference Don't miss this year's exciting event. There's still time to save $100. Use priority code J8TL2D2. http://ad.doubleclick.net/clk;198757673;13503038;p?http://java.sun.com/javaone _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
