Stuart, Nice job on the Cinci. Since the head is moving in and out, I assume it is a Hydrotel? I have a 20v120 (where the table moves in Y instead of the head) that I retrofitted from the Big Blue control 3 years ago. It runs at least 12 hours a day 6 to 7 days a week in my shop. They are very good and reliable machines. A little slow, but the power is incredible. There is nothing like 650+ ft/lbs of spindle torque on a mill. I don't know how much axis thrust they have, but an operator snapped off a 2 inch diameter cutter in mine like it was a pencil.
Don't let anyone knock your tool changer. I have worked with these machines for around 12 years. The ones with automatic tool changers are slow and puke hydraulic fluid, so the operators usually change them by hand. Now let's see some chips flying. Don't forget the raingear, these things are messy. Drip pans and vinyl welding shields around them are a life saver. Glenn -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Stuart Stevenson Sent: Friday, April 18, 2008 9:59 AM To: EMC2-Users-List Subject: [Emc-users] 5 axis cinci Gentlemen, Here is a video of my cinci. Notice the dual arm tool changer. It is very generic and can do many things. :) :) that's me. http://www.youtube.com/watch?v=mxxdq6y8z8M thanks Stuart ------------------------------------------------------------------------- This SF.net email is sponsored by the 2008 JavaOne(SM) Conference Don't miss this year's exciting event. There's still time to save $100. Use priority code J8TL2D2. http://ad.doubleclick.net/clk;198757673;13503038;p?http://java.sun.com/javao ne _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users ------------------------------------------------------------------------- This SF.net email is sponsored by the 2008 JavaOne(SM) Conference Don't miss this year's exciting event. There's still time to save $100. Use priority code J8TL2D2. http://ad.doubleclick.net/clk;198757673;13503038;p?http://java.sun.com/javaone _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
