On Wed, 2008-04-23 at 15:29 -0500, Jeff Epler wrote: > If you have specific examples of input and output values (along with the > value of the 'clamp' parameter) that have changed between emc versions > (please note which versions!), I'd be happy to tell you if it's a result > of this bugfix, or a result of some other difference I'm not aware of. > > Jeff
Well, I may be wrong. The reason I came to my conclusion was that when I setup my Shizuoka's VFD I copied the VFD configuration from my VFD/DRO project. I worked on the VFD/DRO project maybe 6 months ago with 2.2.3? I would have thought that I had tested it in reverse as well as forward but I can't guarantee that. If the component code hasn't changed since then, something else must be at play. Maybe the VFD/DRO configuration I archived is an early incomplete version. Anyway, thanks for the reply, sorry to be a bother. -- Kirk Wallace (California, USA http://www.wallacecompany.com/machine_shop/ Hardinge HNC/EMC CNC lathe, Bridgeport mill conversion, doing XY now, Zubal lathe conversion pending Craftsman AA 109 restoration Shizuoka ST-N/EMC CNC) ------------------------------------------------------------------------- This SF.net email is sponsored by the 2008 JavaOne(SM) Conference Don't miss this year's exciting event. There's still time to save $100. Use priority code J8TL2D2. http://ad.doubleclick.net/clk;198757673;13503038;p?http://java.sun.com/javaone _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
