Sweet! Take some pictures of your machine or a video and post on wiki... John
On 18 May 2008 at 20:50, Rob Jansen wrote: > > > How does EMC2 build bicycles? > > John > > Easy, just write G-code to mill a mold, apply carbon cloth and epoxy > resin in the mold, inser a tube (a bike's inner tube) and bolt the > mold together. Then apply pressure to the inner tube and let the epoxy > harden. > > This is how I make bikes. Until now the molds have been created by > hand from plugs (a model) created by another company (or hand made > ones). In a few weeks I'll start making my own plug and molds using > EMC2 to build a new bike that will be used for record attempts. > > - Rob ------------------------------------------------------------------------- This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2008. http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users