On Mon, May 19, 2008 at 08:32:41PM -0400, xtra209 wrote: > The other issue is with stepconfig wizard. Everything is normal and I > can even test the motors but at the very end the apply button doesn't do > anything useful. It blinks when I either click it with the mouse or > press either <enter> button. However, the only way out of that screen is > to press the cancel button which does work. It doesn't save the > configuration. Head scratching again. The different monitor hasn't > affected this behavior.
You can help me troubleshoot and hopefully fix this problem in the following way: 1. Launch the terminal window: Applications > Accessories > Terminal 2. In the Terminal window, type "stepconf" (all lowercase) and press Enter 3. When the stepconf window appears, just hit "Forward" until you get to the page with the page with the non-working "Apply" button. 4. Click "Apply" one time 5. Copy any messages shown in the Terminal window and put them in an e-mail reply to this message If just clicking "Forward" at every screen isn't enough to cause the problem, then tell me specifically what other things you have to do to make the problem. I hope that with this information, I can fix the bug. Jeff ------------------------------------------------------------------------- This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2008. http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
