Has anybody ever encounter a problem in which a machine goes crazy when you
replace one of your servos with a servo with brake?
In my case I am using sure-servo motors and drives and when I plug in the 24V
to release the brake the other two motors start hunting around. I've even tried
powering the brake with an independent power supply plugged in to a different
circuit in the building and just connecting the low site causes the same
problem.
I am little perplex by it. I could go into more details, I've review the
documentation and have been reviewing everything for 3 days now. I am thinking
there has to be an obvious step that I am missing.
Any comments will be greatly appreciated
Jorge Barrera
MFG.com
some project details:
http://www.mfgx.com/blogs/opensource/2008/05/15/open-source-hardware-the-beginning
-------------------------------------------------------------------------
This SF.net email is sponsored by: Microsoft
Defy all challenges. Microsoft(R) Visual Studio 2008.
http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
_______________________________________________
Emc-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/emc-users
