On Tue, Jul 08, 2008 at 12:56:27PM -0700, Kirk Wallace wrote: > I would like to display the axes positions in larger numbers, and > possibly with an inch/mm toggle. I made an X position pyVCP element on > the AXIS display, but it doesn't change with Touch-Off.
AXIS already has an inch/mm display toggle. To enlarge the font use something like http://cvs.linuxcnc.org/cgi-bin/cvsweb.cgi/emc2/src/emc/usr_intf/axis/etc/axis_big_dro?rev=1.1 in your X resources. We've talked about some ideas for a better way to do this (like on a menu) but nobody has done it yet. ------------------------------------------------------------------------- Sponsored by: SourceForge.net Community Choice Awards: VOTE NOW! Studies have shown that voting for your favorite open source project, along with a healthy diet, reduces your potential for chronic lameness and boredom. Vote Now at http://www.sourceforge.net/community/cca08 _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
