There's a solution in trunk:
http://www.cnczone.com/forums/showthread.php?t=60199&page=2
Regards, Jan
On Tue, Jul 8, 2008 at 21:56, Kirk Wallace <[EMAIL PROTECTED]>
wrote:
> I would like to display the axes positions in larger numbers, and
> possibly with an inch/mm toggle. I made an X position pyVCP element on
> the AXIS display, but it doesn't change with Touch-Off. Can anyone give
> my a head-start on how to make my pyVCP position match AXIS' position
> display?
>
> My lathe_postgui.hal has:
>
> net Xpos => pyvcp.Xposition
>
> I suppose Xpos is not the proper signal? Or I need to process it with
> Touch-Off some how?
>
> --
> Kirk Wallace (California, USA
> http://www.wallacecompany.com/machine_shop/
> Hardinge HNC/EMC CNC lathe,
> Bridgeport mill conversion, doing XY now,
> Zubal lathe conversion pending
> Craftsman AA 109 restoration
> Shizuoka ST-N/EMC CNC)
>
>
> -------------------------------------------------------------------------
> Sponsored by: SourceForge.net Community Choice Awards: VOTE NOW!
> Studies have shown that voting for your favorite open source project,
> along with a healthy diet, reduces your potential for chronic lameness
> and boredom. Vote Now at http://www.sourceforge.net/community/cca08
> _______________________________________________
> Emc-users mailing list
> Emc-users@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/emc-users
>
-------------------------------------------------------------------------
Sponsored by: SourceForge.net Community Choice Awards: VOTE NOW!
Studies have shown that voting for your favorite open source project,
along with a healthy diet, reduces your potential for chronic lameness
and boredom. Vote Now at http://www.sourceforge.net/community/cca08
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
