This is a new and updated (today) install. I am running steppers motors. In manual mode it works great, MDI and Auto mode it will randomly go nuts on on one or two varying axises. Nuts, sometimes going back and forth about 10 or 20 degrees on a axis with no movement on the digits on the screen. Or, moving slowly in one direction with no movements on the location display of the screen. On the MDI it seams to do it when I first start up and go into that mode, I can execute some code and it stops all the time I think. On the auto it will do it sometimes when I go into the mode and sometimes when I get done with a program. It will stop if I go back to Manual mode all the time.
Any thoughts? Andy ------------------------------------------------------------------------- This SF.Net email is sponsored by the Moblin Your Move Developer's challenge Build the coolest Linux based applications with Moblin SDK & win great prizes Grand prize is a trip for two to an Open Source event anywhere in the world http://moblin-contest.org/redirect.php?banner_id=100&url=/ _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
