core_stepper.hal http://pastebin.ca/1192190 pluto_pinout.hal http://pastebin.ca/1192191 sim_pinout.hal http://pastebin.ca/1192193 standard_pinout.hal http://pastebin.ca/1192194 stepper_inch.ini http://pastebin.ca/1192195 xylotex_pinout.hal http://pastebin.ca/1192196
Stephen Wille Padnos wrote: > andyholcomb wrote: > > >> [snip] >> >> It works fine when the program is running but if I pause it or stop in >> auto mode it sometimes goes nuts (Not so true I have had a axis mess up >> while the file was running, the z was jittering while the code was >> running on the x and y axises( z slowly went down)). In MDI mode, >> sometimes it will start doing it as soon as I press f5 to go into MDI >> mode other times it does it when the command is completed, other times >> it does it on the still axis while the command is running. >> The program is irrelevant. I think it started happening after I put my >> backlash setting in, would that have anything to do with it? >> I just went out and set all of my backlashes to 0 and it does not seem >> to do it. Does this help? >> >> >> > It narrows things down a bit, but it's hard to get far without knowing > more about your config. Please post your .ini and .hal files to > http://pastebin.ca (or somewhere else on the net), and send us the > links. There's not much more we can do without knowing what we're chasing. > > - Steve > > > ------------------------------------------------------------------------- > This SF.Net email is sponsored by the Moblin Your Move Developer's challenge > Build the coolest Linux based applications with Moblin SDK & win great prizes > Grand prize is a trip for two to an Open Source event anywhere in the world > http://moblin-contest.org/redirect.php?banner_id=100&url=/ > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users > > ------------------------------------------------------------------------- This SF.Net email is sponsored by the Moblin Your Move Developer's challenge Build the coolest Linux based applications with Moblin SDK & win great prizes Grand prize is a trip for two to an Open Source event anywhere in the world http://moblin-contest.org/redirect.php?banner_id=100&url=/ _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
