I used this post -
http://www.cnczone.com/forums/showpost.php?p=382237&postcount=1
to modify one of my systems. It completely eliminated the startup issues
associated with idle current reduction. I do a lot of operations where Z might
not make a move for more than 10 seconds - and it would lose steps.
I need to do this mod on the other router when I get time.
** REMEMBER to be very careful when making mods to the HobbyCNC board. It is
very unforgiving.
Also John, the settings on the Wiki work with my system as well.
Regards,
Doug Goff
[EMAIL PROTECTED]
www.woodntractors.com
Scale Tractors In Wood
-------------------------------------------------------------------------
This SF.Net email is sponsored by the Moblin Your Move Developer's challenge
Build the coolest Linux based applications with Moblin SDK & win great prizes
Grand prize is a trip for two to an Open Source event anywhere in the world
http://moblin-contest.org/redirect.php?banner_id=100&url=/
_______________________________________________
Emc-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/emc-users
