Dear Ray,
Attached my .ini file The circle is generate by SurfCam Program, therefore is a buch of points. Looking forward hearing from you. Regards, Jimmy ---------- Forwarded message ---------- From: Ray Henry <[EMAIL PROTECTED]> Date: 2008/9/23 Subject: Re: [Emc-users] Stop and Go To: "Enhanced Machine Controller (EMC)" <emc-users@lists.sourceforge.net> On Tue, 2008-09-23 at 13:21 -0300, Jimmy Schneiderman wrote: > During milling at 4.000 mm/min, when it comes to a curve the speed > slow down to 2.000 mm/min. What accel is set in your INI file? > When making a 1 meter circle the speed does not top 2.000 mm/min and > it does not move continues. It stops and goes several times, > shaking all the structure. How is this circle commanded, a single g2 or g3 or is it a bunch of small lines? ------------------------------------------------------------------------- This SF.Net email is sponsored by the Moblin Your Move Developer's challenge Build the coolest Linux based applications with Moblin SDK & win great prizes Grand prize is a trip for two to an Open Source event anywhere in the world http://moblin-contest.org/redirect.php?banner_id=100&url=/ _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
motenc.ini
Description: Binary data
------------------------------------------------------------------------- This SF.Net email is sponsored by the Moblin Your Move Developer's challenge Build the coolest Linux based applications with Moblin SDK & win great prizes Grand prize is a trip for two to an Open Source event anywhere in the world http://moblin-contest.org/redirect.php?banner_id=100&url=/
_______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
