OUTPUT_SCALE is only used on servo systems, and even there it's not mandatory. INPUT_SCALE will be dropped in favour of SCALE on stepper systems, stepconf already only puts SCALE in a generated ini file. More details here: http://www.linuxcnc.org/docview/2.2/html//config_ini_config.html
Especially 1.3.9.3 Stepper-related items Regards, Alex ----- Original Message ----- From: "Kirk Wallace" <[EMAIL PROTECTED]> To: "Enhanced Machine Controller (EMC)" <emc-users@lists.sourceforge.net> Sent: Thursday, October 16, 2008 8:56 PM Subject: Re: [Emc-users] Calibration of Sherline Mill under CNC > On Thu, 2008-10-16 at 13:27 -0400, John Domville wrote: >> Thanks for the information. Where do I check the output scale? >> Somewhere >> in the config file? >> >> John > > Yes, in the config_name.ini file in > the /home/user_name/emc2/configs/config_name/ directory. > Each AXIS section in the file will have a OUTPUT_SCALE. Usually it is > used to change the direction the axis moves (or rather, joint) by making > it +1 or -1. Stepconf most likely set it for you, but it wouldn't hurt > to go through the .ini file to get an idea of how it works. > > Kirk > > ------------------------------------------------------------------------- This SF.Net email is sponsored by the Moblin Your Move Developer's challenge Build the coolest Linux based applications with Moblin SDK & win great prizes Grand prize is a trip for two to an Open Source event anywhere in the world http://moblin-contest.org/redirect.php?banner_id=100&url=/ _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
