Thanks for the info. As for the 3PH transformer, I am not connected to the grid, got a PV and wind generator setup with a battery pack and an inverter which will not run a machine of this size for any useful length of time anyway. Picked up a 3PH diesel generator a few years back that will run this kind of tool so 3PH is not a problem. The generator is 208V and the plate on the mill says 230V but most of the time that is not a problem with motors unless running at full load, it would put that 100 volt bus down around 90 volts. Maybe need some boost transformers unless the existing transformer in the machine has some different taps.
__________ Andre' B. Clear Lake, Wi. ------------------------------------------------------------------------- This SF.Net email is sponsored by the Moblin Your Move Developer's challenge Build the coolest Linux based applications with Moblin SDK & win great prizes Grand prize is a trip for two to an Open Source event anywhere in the world http://moblin-contest.org/redirect.php?banner_id=100&url=/ _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
