On Mon, 24 Nov 2008, Sebastian Kuzminsky wrote:

> Date: Mon, 24 Nov 2008 21:09:57 -0700
> From: Sebastian Kuzminsky <[EMAIL PROTECTED]>
> Reply-To: "Enhanced Machine Controller (EMC)"
>     <emc-users@lists.sourceforge.net>
> To: "Enhanced Machine Controller (EMC)" <emc-users@lists.sourceforge.net>
> Subject: Re: [Emc-users] Using hostmot2 for 7i43
> 
> Peter C. Wallace wrote:
>> On Mon, 24 Nov 2008, Eric H. Johnson wrote:
>>
>>> I changed the parallel port mode to EPP, no difference. How does one tell
>>> what the interface version is? It is not listed in the BIOS. The BIT files I
>>> am using are dated 11/11/08.
>>
>> First off it would help me to know whether the firmware download succeeded
>>
>> This is indicated by both red LEDS being off (only the yellow PWR led being
>> on)
>>
>> If both red LEDS are off, then the firmware loaded successfully
>
> The error message in Eric's original email indicates that the 7i43 didnt
> even come out of CPLD reset:
>
>> hm2_7i43: /DONE is not low after CPLD reset!
>
>
> This is in hm2_7i43_reset(), in hm2_7i43.c.
>
> The driver writes address 0x7f7f, writes data 0x5A, then (when the CPLD
> has control) writes address 0x01, writes data 0x00, waits 1 us, writes
> data 0x01, and waits 2 ms.  Then it reads a byte and checks the LSb, if
> it's 1 it emits that error and refuses to go on.
>
> In my experience it indicates total lack of communication with the 7i43.
>
>

Oh OK I didn't look closely enough at the error message...

Heres a really basic question:

Is the 7I43 jumperered for EPP mode?

If you are using USB power, Is the USB power jumper set to ON?


> -- 
> Sebastian Kuzminsky
> sudden wind it stole my hat and i went on chasing it -- Gogol Bordello
>
> -------------------------------------------------------------------------
> This SF.Net email is sponsored by the Moblin Your Move Developer's challenge
> Build the coolest Linux based applications with Moblin SDK & win great prizes
> Grand prize is a trip for two to an Open Source event anywhere in the world
> http://moblin-contest.org/redirect.php?banner_id=100&url=/
> _______________________________________________
> Emc-users mailing list
> Emc-users@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/emc-users
>

Peter Wallace
Mesa Electronics

(\__/)
(='.'=) This is Bunny. Copy and paste bunny into your
(")_(") signature to help him gain world domination.


-------------------------------------------------------------------------
This SF.Net email is sponsored by the Moblin Your Move Developer's challenge
Build the coolest Linux based applications with Moblin SDK & win great prizes
Grand prize is a trip for two to an Open Source event anywhere in the world
http://moblin-contest.org/redirect.php?banner_id=100&url=/
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users

Reply via email to