On Dec 27, 2008, at 10:10 PM, Chris Radek wrote: > On Sat, Dec 27, 2008 at 10:01:31PM -0800, Dave Engvall wrote: >> >> This code executes cleanly on the 2.2.5 on my Mazak but consistently >> gives errors (gouging) under 2.2.7 or 2.2.8. >> It also worked fine under sim pre-.2.1 (?). >> >> So my question is: what changed between these versions that might >> affect this. > > Nothing related to gouging or diameter compensation was changed > between those versions. > > My guess is a difference in the tool table (diameters) is the cause > of the different behavior you are seeing. > Hi Chris,
Ah, bad case of the stupids. Synergy expects tool offsets from nominal not real tool diameters and I totally spaced. The 2.2.8 is on my desktop machine so I ssh'ed into the mazak and cat'ed both tool tables; having them alongside each other made the error obvious. Thanks. Dave > > ---------------------------------------------------------------------- > -------- > _______________________________________________ > Emc-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-users ------------------------------------------------------------------------------ _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
