Gene With the help of Peter Wallace I found the info I was needing. I'm putting a 5i23 with a 7i33 and 7i37 in a hurco mill using the hurco amps. I'm new to Linux and EMC2.
I also found the reason the orginal post never making it a mistake in the address . Thanks ----- Original Message ----- From: "Gene Heskett" <[email protected]> To: "Enhanced Machine Controller (EMC)" <[email protected]> Sent: Wednesday, December 31, 2008 4:07 PM Subject: Re: [Emc-users] Is this list working? > On Wednesday 31 December 2008, Donnie Timmons wrote: > >I'm new and have made a request for some info and never received a reply. Is > > this mail list work? > > It is working just fine Donnie, but the above question IS your first post. If > you sent another at some point, the hounds must have eaten the postman cuz it > didn't get here, or it is older than my expire settings for this mailbox, > which is set for 183 days. > > Now, what was your question? I may not be able to answer it, but the authors > of this code probably can. > > -- > Cheers, Gene > "There are four boxes to be used in defense of liberty: > soap, ballot, jury, and ammo. Please use in that order." > -Ed Howdershelt (Author) > Be careful when you bite into your hamburger. > -- Derek Bok > > -------------------------------------------------------------------------- ---- > _______________________________________________ > Emc-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-users ------------------------------------------------------------------------------ _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
