Jeff This is the last few line of dmesg
[ 6787.530813] hm2/hm2_5i23.0: Watchdog: 1 [ 6787.530816] hm2/hm2_5i23.0: clock_frequency: 48000000 Hz (48.000 MHz) [ 6787.530818] hm2/hm2_5i23.0: version: 0 [ 6787.530820] hm2/hm2_5i23.0: timer_addr: 0x0C00 [ 6787.530822] hm2/hm2_5i23.0: status_addr: 0x0D00 [ 6787.530824] hm2/hm2_5i23.0: reset_addr: 0x0E00 [ 6787.530826] hm2/hm2_5i23.0: instance 0: [ 6787.530828] hm2/hm2_5i23.0: param timeout_ns = 1000000000 [ 6787.530830] hm2/hm2_5i23.0: pin has_bit = 0 [ 6787.530832] hm2/hm2_5i23.0: reg timer = 0x02DC6BFF [ 6787.530992] hm2/hm2_5i23.0: registered [ 6787.530996] hm2_5i23.0: initialized AnyIO board at 0000:01:07.0 [ 9865.316269] hm2_5i23.0: dropping AnyIO board at 0000:01:07.0 [ 9865.316279] hm2/hm2_5i23.0: unregistered [ 9865.319333] hm2_pci: driver unloaded [ 9865.324628] hm2: unloading [ 9865.411090] RTAI[math]: unloaded. [ 9865.482233] SCHED releases registered named ALIEN RTGLBH [ 9865.500360] RTAI[malloc]: unloaded. [ 9865.600053] RTAI[sched]: unloaded (forced hard/soft/hard transitions: traps 0, syscalls 0). [ 9865.603378] I-pipe: Domain RTAI unregistered. [ 9865.603387] RTAI[hal]: unmounted. don...@mill:~$ ----- Original Message ----- From: "Jeff Epler" <[email protected]> To: "Enhanced Machine Controller (EMC)" <[email protected]> Sent: Saturday, January 03, 2009 8:42 PM Subject: Re: [Emc-users] EMC startup error > It must be a different problem than the one I was guessing at .. if you > get any errors at shutdown, those would be useful to see. So would the > last 20 lines or so that are shown when you type 'dmesg' at the > commandline. > > Jeff > > -------------------------------------------------------------------------- ---- > _______________________________________________ > Emc-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-users ------------------------------------------------------------------------------ _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
