Peter C. Wallace wrote: > I think with the current driver, the watchdog cannot be disabled, probably a > good thing...
Seb and I were discussing that on IRC one evening. I think I convinced him that it would be nice if the watchdog slept quietly without being petted, until you "arm" it by setting timeout-ns to some non-zero value. Sometimes you just want to be able to test stuff - manually set a DAC output to some voltage, then check with a voltmeter, or manually turn a general purpose output on and off. Arming the watchdog as soon as the driver loads makes that impossible. I don't know if that the driver has been changed to let the dog sleep, and if so, whether that change is in the released 2.2.8, or only on CVS trunk. Regards, John Kasunich ------------------------------------------------------------------------------ This SF.net email is sponsored by: SourcForge Community SourceForge wants to tell your story. http://p.sf.net/sfu/sf-spreadtheword _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
