Hello, I´m trying to configure EMC to control a BZT-PFM1500P [1]. The maschin is moving already, but I have two questions:
1. How to generate a 10kHz enable signal? To enable the amplifiers of the controller a 10kHz signal on pin 16 oft LPT1 is necessary. How can I generate such a signal? Since I didn´t figure out the right way to do it, I simply setup a spindle PWM signal on pint 16, so I can enable the amplifiers by turning on the spindle. 2. How to configure pins on LPT2? The controller has to parallel ports and the spindle on/on and speed signals are located on the 2nd port. I hope you can give me a hint how to solve these to issues. See you Flo ------------------------------------------------------------------------------ This SF.net email is sponsored by: SourcForge Community SourceForge wants to tell your story. http://p.sf.net/sfu/sf-spreadtheword _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
