Hi all, In an earlier post I commented on pausing Emc2/Axis in the middle of a cut in order to clear swarf and the problem of using the "stop" button which turns off the spindle and coolant: how to "set next line" and resume where you left off when the spindle and coolant are off? Alex J. replied that there was an ini file setting that governed this behavior.
I tried starting the spindle and coolant in MDI (M3S3000 M8) and I also tried starting them in manual mode, but when I try to re-start the cut file where I left off, the spindle and coolant get turned off every time. I read and re-read my ini file and for the life of me I can't identify a statement that will allow me to change this behavior. Any help here?? Thanks to all for considering this problem. Tom ------------------------------------------------------------------------------ Create and Deploy Rich Internet Apps outside the browser with Adobe(R)AIR(TM) software. With Adobe AIR, Ajax developers can use existing skills and code to build responsive, highly engaging applications that combine the power of local resources and data with the reach of the web. Download the Adobe AIR SDK and Ajax docs to start building applications today-http://p.sf.net/sfu/adobe-com _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
