> Marty Swartz wrote:
> > Thanks, Chris! I agree with Sven, you've made G41/G42 perfectly
> clear.
> >
> > I've spent the last several hours banging my head against my NEXT
> challenge,
> > one that I'm sure that many of you have been through. I want to
> use a .25"
> > endmill to cut a hole 0.505" in diameter. My (fruitless) approach
> so far has
> > been as follows. (Sorry for the G-English)
Marty there are some g code generators on the wiki site one that will generate
the code for
milling out a counter bore.
http://wiki.linuxcnc.org/cgi-bin/emcinfo.pl?Simple_EMC_G-Code_Generators
John
------------------------------------------------------------------------------
Create and Deploy Rich Internet Apps outside the browser with Adobe(R)AIR(TM)
software. With Adobe AIR, Ajax developers can use existing skills and code to
build responsive, highly engaging applications that combine the power of local
resources and data with the reach of the web. Download the Adobe AIR SDK and
Ajax docs to start building applications today-http://p.sf.net/sfu/adobe-com
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
