On 28 Mar 2009 at 0:38, Steve Blackmore wrote:
> >Are you using Touch Off P1? > > > >If you don't have a tool "loaded" you don't get the option to set > the tool table. > > I did. > > I found that stepconf doesn't create a lathe style tooltable, and if > you > do try to touch a tool off, it fails with "cannot have an x tool > offset > with orientation 0" That has been changed in 2.3 or sometime before I'm not sure when. I just checked my 2.3 stepconf generated lathe file and it is a lathe style. > > A couple of other things, > > Axis doesn't seem to remember window resizing? Yea, that is somewhat of a pain... > > What defines where the origin point on the screen is on startup > (cyan > crossed circle) - It's always off the screen up to the left? If you have a cyan cross then you still have an offset. As Axis tries to center up and zoom to the proper size on startup. Change your preview plot to nothing or a file of your choice. Add to your [DISPLAY] section OPEN_FILE="" and you will not get a splash file and the XZ will be centered. John ------------------------------------------------------------------------------ _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
