On Fri, 2009-04-17 at 22:45 -0700, Michael Jones wrote: > Whenever I position my z axis where I want my G54 zero point the > relative position reads -.0695 instead of zero? > > I can't find this setting anywhere in the system.. or at least > anywhere I have thought to look.. > > Where can I set my z zero point to 0.00 > > Thanks, > > - Michael
You might check your the .var file for the setup that you are running. The file will be in your emc2 directory, something like /home/your_username/emc2/configs/your_machine_config/something.var This document explains what some of these variables are: http://www.linuxcnc.org/docview/html/gcode_coordinates.html#r1_3 http://www.linuxcnc.org/docview/html//common_machining_center.html#sub:Parameters short version: http://alturl.com/ftvb Your -0.0695 might be in there? Here is another page about coordinates: http://wiki.linuxcnc.org/cgi-bin/emcinfo.pl?CoordinateSystems -- Kirk Wallace http://www.wallacecompany.com/machine_shop/ http://www.wallacecompany.com/E45/index.html California, USA ------------------------------------------------------------------------------ Stay on top of everything new and different, both inside and around Java (TM) technology - register by April 22, and save $200 on the JavaOne (SM) conference, June 2-5, 2009, San Francisco. 300 plus technical and hands-on sessions. Register today. Use priority code J9JMT32. http://p.sf.net/sfu/p _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
