hello i want to be sure
5241 2.000000 5242 1.000000 5243 -2.000000 5244 0.000000 5245 0.000000 5246 0.000000 where 52XX is for G55. XX41 is X axis XX42 is Y axis XX43 is Z axis XX44 is A .. XX45 is B ... XX46 is C .... on the the picture of same page- 1.3 Fixture Offsets (G54-G59.3) i think G55 should be: 5241 should be 4 because on picture i can see G55 X4 Y0 5241 4.00 5242 0.00 5243 0.00 etc. am i wrong? thanks Aram > On Fri, 2009-04-17 at 22:45 -0700, Michael Jones wrote: >> Whenever I position my z axis where I want my G54 zero point the >> relative position reads -.0695 instead of zero? >> >> I can't find this setting anywhere in the system.. or at least >> anywhere I have thought to look.. >> >> Where can I set my z zero point to 0.00 >> >> Thanks, >> >> - Michael > > You might check your the .var file for the setup that you are running. > The file will be in your emc2 directory, something like > /home/your_username/emc2/configs/your_machine_config/something.var > > This document explains what some of these variables are: > http://www.linuxcnc.org/docview/html/gcode_coordinates.html#r1_3 > > http://www.linuxcnc.org/docview/html//common_machining_center.html#sub:Parameters > short version: http://alturl.com/ftvb > > Your -0.0695 might be in there? > > Here is another page about coordinates: > http://wiki.linuxcnc.org/cgi-bin/emcinfo.pl?CoordinateSystems > > -- > Kirk Wallace > http://www.wallacecompany.com/machine_shop/ > http://www.wallacecompany.com/E45/index.html > California, USA > > > ------------------------------------------------------------------------------ > Stay on top of everything new and different, both inside and > around Java (TM) technology - register by April 22, and save > $200 on the JavaOne (SM) conference, June 2-5, 2009, San Francisco. > 300 plus technical and hands-on sessions. Register today. > Use priority code J9JMT32. http://p.sf.net/sfu/p > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users > ------------------------------------------------------------------------------ Stay on top of everything new and different, both inside and around Java (TM) technology - register by April 22, and save $200 on the JavaOne (SM) conference, June 2-5, 2009, San Francisco. 300 plus technical and hands-on sessions. Register today. Use priority code J9JMT32. http://p.sf.net/sfu/p _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
