Jim, this is way beyond EMC support ... You need seek help for BASIC PC setup elsewhere. However
Jim Fleig - CNC Services wrote: > Hi Ian, > > Thank you for the reply. > > The boot sequence was set to CDROM, A, C. > > I downloaded Ranish, unzipped and copied to a floppy. The boot sequence was > changed to A, C, SCSI (no A, C, CDROM choice). When the computer is turned change the BIOS to show other devices than SCSI unless your system has a real SCSI. If so then you need to setup BIOS extension in SCSI controller. This is going way beyond this mailing list issues. > on the boot screen lists Pri. Master Disk: LBA, UDMA 66, 8455MB, Pri. Slave > Disk: None, Sec. Master Disk: None, Sec. Slave Disk: CDROM, UDMA 33. Now that's your problem. CD drive has to be set as a secondary master in order for PC to bootup from CD. Check BIOS setup, CD drive jumpers and it's cable. > the error displayed is: Non-System disk or disk error Replace and strike any > key when ready. > > What next? > > I look forward to your reply. > > Have a good day, > > Cheers, > > Jim > -- Rafael ------------------------------------------------------------------------------ Stay on top of everything new and different, both inside and around Java (TM) technology - register by April 22, and save $200 on the JavaOne (SM) conference, June 2-5, 2009, San Francisco. 300 plus technical and hands-on sessions. Register today. Use priority code J9JMT32. http://p.sf.net/sfu/p _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
