> On Tue, 2009-05-12 at 17:24 -400, Frank Tkalcevic wrote: > > > On Tue, 2009-05-12 at 15:30 -0400, Douglas Pollard wrote: > > > I don't know where to tell you to look but the metric gear info is > > > out there somewhere for little or no money. > > > > I thought you where wrong here because I was getting nearly > > goose eggs, but I tried Googling "metric gear rack profile" > > and got this: > > http://www.sdp-si.com/d785/html1/D785T000.html > > > > On the sdp-si web site you can download 2d and 3d models of all the gears > and pulleys they sell. Does anyone know if the models are accurate enough > to generate gcode from?
I don't know about all the gear types, but I know the timing belt pulleys are accurate enough to machine from. HTH Greg www.distinctperspectives.com ------------------------------------------------------------------------------ The NEW KODAK i700 Series Scanners deliver under ANY circumstances! Your production scanning environment may not be a perfect world - but thanks to Kodak, there's a perfect scanner to get the job done! With the NEW KODAK i700 Series Scanner you'll get full speed at 300 dpi even with all image processing features enabled. http://p.sf.net/sfu/kodak-com _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
