At 11:11 AM 5/13/2009, you wrote:
>On Wed, 2009-05-13 at 05:29 -0400, Mark Wendt (Contractor) wrote:
>... snip
> > Kurt,
> >
> > Can you read in .dxf's? If you want, you could send me the
> > gear drawings of the gears you're interested in, and I can save them
> > in AutoCad 2003 as dxf's and send them back to you.
> >
> > Mark
>
>Thanks Mark. I will be generating the gear profiles from QCAD or a
>spreadsheet, so I don't need the conversion. I hope you don't mind me
>keeping you in mind for other .dwg files though. I think Frank wanted to
>know if a gear vendor's .dwg files were good for making gears. I
>responded with, I don't know, because I can't view them.
>--
>Kirk Wallace
>http://www.wallacecompany.com/machine_shop/
>http://www.wallacecompany.com/E45/index.html
>California, USA
Kirk,
No problem, any time.
Mark
------------------------------------------------------------------------------
The NEW KODAK i700 Series Scanners deliver under ANY circumstances! Your
production scanning environment may not be a perfect world - but thanks to
Kodak, there's a perfect scanner to get the job done! With the NEW KODAK i700
Series Scanner you'll get full speed at 300 dpi even with all image
processing features enabled. http://p.sf.net/sfu/kodak-com
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
